Zoom
Description
Features of GIGABYTE X670E Aorus Xtreme DDR5 AMD Motherboard
- AMD Socket AM5 : Supports AMD Ryzen™ 7000 Series Processors
- Unparalleled Performance : Direct 18 2 2 Phases Digital VRM Solution
- Dual Channel DDR5 : 4*DIMMs with AMD EXPO™ & Intel® XMP Memory Module Support with GIGABYTE X670E Aorus Xtreme
- Next Generation Storage : 4*PCIe 5.0 x4 M.2 Connectors
- Fins-Array III & M.2 Thermal Guard III : To Ensure VRM Power Stability & 25110 PCIe 5.0 M.2 SSD Performance
- EZ-Latch Plus : SMD PCIe 5.0 x16 Slot & M.2 Connectors with Quick Release & Screwless Design
- Hi-Fi Audio with DTS : X® Ultra : ALC1220 CODEC and Rear ESS SABRE Hi-Fi 9118 DAC with Front ESSential USB DAC Bundled
- Fast Networks : Marvell® AQtion 10GbE LAN & Intel® Wi-Fi 6E 802.11ax
- Extended Connectivity : DP, HDMI, USB-C® 10Gbps, Dual USB-C® 20Gbps and Upcoming GIGABYTE USB4 AIC Support
- Q-Flash Plus : Update BIOS Without Installing the CPU, Memory and Graphics Card
Specifications of GIGABYTE X670E Aorus Xtreme DDR5 AMD Motherboard
| CPU | AMD Socket AM5, support for : AMD Ryzen™ 7000 Series Processors |
| Chipset | AMD X670 |
| Memory | Support for DDR5 6600(OC) / 6400(OC) / 6200(OC) / 6000(OC) / 5600(OC) / 5200 / 4800 / 4400 MHz memory modules |
| 4 x DDR5 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory | |
| Dual channel memory architecture | |
| Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules | |
| Support for AMD EXtended Profiles for Overclocking (AMD EXPO™) and Extreme Memory Profile (XMP) memory modules | |
| Onboard Graphics | 1 x HDMI port, supporting a maximum resolution of 4096×2160@60 Hz |
| * Support for HDMI 2.0 version and HDCP 2.3. | |
| 1 x DisplayPort, supporting a maximum resolution of 3840×2160@144 Hz | |
| * Support for DisplayPort 1.4 version and HDR. | |
| Audio | Realtek® ALC1220-VB CODEC |
| * The front panel line out jack supports DSD audio. | |
| ESS ES9118 DAC chip | |
| Support for DTS:X® Ultra | |
| High Definition Audio | |
| 2/4/5.1-channel | |
| * You can change the functionality of an audio jack using the audio software. To configure 5.1-channel audio, access the audio software for audio settings. | |
| Support for S/PDIF Out | |
| LAN | Marvell® AQtion AQC113C 10GbE LAN chip |
| Wireless Communication Module | Intel® Wi-Fi 6E AX210 |
| WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency bands | |
| BLUETOOTH 5.3 | |
| Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate | |
| (Actual data rate may vary depending on environment and equipment.) | |
| Expansion Slots | CPU: |
| 1 x PCI Express x16 slot, supporting PCIe 5.0* and running at x16 (PCIEX16) | |
| * Actual support may vary by CPU. | |
| * The M2B_CPU and M2C_CPU slots share bandwidth with the PCIEX16 slot. When the M2B_CPU or M2C_CPU slot is populated, the PCIEX16 slot operates at up to x8 mode. | |
| * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. | |
| Chipset: | |
| 1 x PCI Express x16 slot, supporting PCIe 4.0 and running at x4 (PCIEX4) | |
| 1 x PCI Express x16 slot, supporting PCIe 3.0 and running at x2 (PCIEX2) | |
| Support for AMD CrossFire™ technology (PCIEX16 and PCIEX4) | |
| Storage Interface | CPU: |
| 1 x M.2 connector (Socket 3, M key, type 25110/2280 PCIe 5.0* x4/x2 SSD support) (M2A_CPU) | |
| * Actual support may vary by CPU. | |
| 3 x M.2 connectors (Socket 3, M key, type 22110/2280 PCIe 5.0* x4/x2 SSD support (M2B_CPU/M2C_CPU/M2D_CPU) | |
| * Actual support may vary by CPU. | |
| Chipset: | |
| 6 x SATA 6Gb/s connectors | |
| RAID 0, RAID 1, and RAID 10 support for NVMe SSD storage devices | |
| RAID 0, RAID 1, and RAID 10 support for SATA storage devices | |
| USB | CPU: |
| 1 x USB Type-C® port on the back panel, with USB 3.2 Gen 2 support | |
| 2 x USB 3.2 Gen 2 Type-A ports (red) on the back panel | |
| CPU USB 2.0 Hub: | |
| 4 x USB 2.0/1.1 ports on the back panel | |
| Chipset: | |
| 2 x USB Type-C® ports, with USB 3.2 Gen 2×2 support (1 port on the back panel, 1 port available through the internal USB header) | |
| 4 x USB 3.2 Gen 2 Type-A ports (red) on the back panel | |
| 4 x USB 3.2 Gen 1 ports available through the internal USB headers | |
| 4 x USB 2.0/1.1 ports available through the internal USB headers | |
| Internal I/O Connectors | 1 x 24-pin ATX main power connector |
| 2 x 8-pin ATX 12V power connectors | |
| 1 x CPU fan header | |
| 1 x water cooling CPU fan header | |
| 4 x system fan headers | |
| 4 x system fan/water cooling pump headers | |
| 2 x addressable LED strip headers | |
| 2 x RGB LED strip headers | |
| 1 x CPU cooler LED strip/RGB LED strip header | |
| 4 x M.2 Socket 3 connectors | |
| 6 x SATA 6Gb/s connectors | |
| 1 x front panel header | |
| 1 x front panel audio header | |
| 1 x USB Type-C® header, with USB 3.2 Gen 2×2 support | |
| 2 x USB 3.2 Gen 1 headers | |
| 2 x USB 2.0/1.1 headers | |
| 1 x noise detection header | |
| 1 x THB_U4 add-in card connector | |
| 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only) | |
| 1 x power button | |
| 1 x reset button | |
| 2 x temperature sensor headers | |
| 1 x reset jumper | |
| 1 x Clear CMOS jumper | |
| Voltage Measurement Points | |
| Back Panel Connectors | 1 x Q-Flash Plus button |
| 1 x Clear CMOS button | |
| 2 x SMA antenna connectors (2T2R) | |
| 1 x DisplayPort | |
| 1 x HDMI 2.0 port | |
| 1 x USB Type-C® port, with USB 3.2 Gen 2×2 support | |
| 1 x USB Type-C® port, with USB 3.2 Gen 2 support | |
| 6 x USB 3.2 Gen 2 Type-A ports (red) | |
| 4 x USB 2.0/1.1 ports | |
| 1 x RJ-45 port | |
| 1 x optical S/PDIF Out connector | |
| 2 x audio jacks | |
| I/O Controller | iTE® I/O Controller Chip |
| H/W Monitoring | Voltage detection |
| Temperature detection | |
| Fan speed detection | |
| Water cooling flow rate detection | |
| Fan fail warning | |
| Fan speed control | |
| * Whether the fan (pump) speed control function is supported will depend on the fan (pump) you install. | |
| Noise detection | |
| BIOS | 1 x 256 Mbit flash |
| Use of licensed AMI UEFI BIOS | |
| PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 | |
| Unique Features | Support for GIGABYTE Control Center (GCC) |
| * Available applications in GCC may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications. | |
| Support for Q-Flash | |
| Support for Q-Flash Plus | |
| Support for Smart Backup | |
| Bundled Software | Norton® Internet Security (OEM version) |
| LAN bandwidth management software | |
| Operating System | Support for Windows 11 64-bit |
| Support for Windows 10 64-bit | |
| Form Factor | E-ATX Form Factor; 30.5cm x 26.9cm |
| Warranty | 3 Years |
Shipping & Return
Shipping policy
Brain Tech PC operated by Nishi Infotek LLP ships to almost all pin codes across India. We use reliable courier partners to ensure your order reaches you safely and on time.
1. Shipping Costs
We offer Free Shipping on most prepaid orders across India.
-
If a specific shipping charge applies to a small order or a remote area, it will be calculated and displayed at checkout before you make a payment.
-
There are no hidden charges. The total price shown at checkout is the final price.
2. Order Processing Time (Handling Time)
-
Processing Time: Orders are usually processed and packed within 1 to 2 business days (Monday to Saturday).
-
Order Cut-off Time: Orders placed after 2:00 PM IST will be processed on the next business day.
-
Custom PCs: For Custom PC builds, please allow an additional 2-3 days for assembly and stress testing before dispatch.
3. Estimated Delivery Time
-
Transit Time: Once shipped, the estimated delivery time is 2 to 4 business days depending on your location.
-
Total Delivery Time: You can expect to receive your order within 3 to 6 business days from the date of purchase.
-
Metro Cities: 3-4 Days
-
Rest of India: 4-6 Days
-
Remote Areas: May take slightly longer.
-
(Note: Delivery timelines may be impacted by public holidays, extreme weather, or courier delays beyond our control.)
4. Courier Partners
We ship using trusted carriers to ensure the safety of high-value electronics:
-
Blue Dart
-
Delhivery
-
DTDC
-
Amazon Shipping
5. Order Tracking
Once your order is shipped, you will receive an email and SMS with the Tracking Number and the courier company's link. You can track your package live to know the expected delivery date.
6. Damaged or Open Packages
IMPORTANT:
-
Do not accept the package if the seal is broken, tampered with, or damaged.
-
Video Recording: We highly recommend making an unboxing video (without cuts) when opening your package. This is mandatory proof if you receive a damaged product or missing accessories.
-
If you face any issues, contact us immediately at +91 9146194675 or contact@braintechpc.in.
7. International Shipping
Currently, we do not ship internationally. We ship only within India.
8. Contact Information
If you have any questions about your shipment, please contact us:
-
Phone: +91 9146194675
-
Email: contact@braintechpc.in
-
Address: 1st Floor, 103, Prakashdeep Apartment, Station Road, O.T Section, Ulhasnagar, Maharashtra 421002, India
My Wishlist
Wishlist is empty.
Compare
Shopping cart
